| 
Call 24/7 (518) 465-1549 or (800) 613-4738
CP 0014 Ideal for drilling operations which are above the capacity of CP 0009 and where a full size rock drill would beunwieldy, the CP 0014 is the ideal tool. As a rock drill witha normal depth rating of up to 0.6 m. (more in favourable circumstances), it can be used for:
• Demolition shots and sign-hanging
• Drilling in concrete, granite, limestone, brick work
• As a hammer it will chip concrete, cut chases enlargecavities, trim brick faces and scabble surfaces
CP 0014
• High power-to-weight ratio
• Six-spline piston provides ample load-bearing surfaces for long life
• Cushioned piston for smooth operation,long life
• Spring retainer
• “D” handle with outside trigger
• Integral, large-capacity oil chamber in thehandle provides continuous lubrication
• Teasing throttle for precise control • Muffler available to reduce noise • Right-hand rotation
| Weight | 14.77 lbs |
|---|---|
| Length | 18.8 in |
| Air Consumption | 47 cfm |
| Blows Per Minute | 2520 |
| Vibration Level 3 Axes (ISO 20643) | 66.2 / 69.5 |
| Sound Pressure Level (ISO 11203) | 103 |
| Sound Pressure Level (ISO 11203) | 88 |
| Retainer Type | Spring |
| Drill Rate in Hard Rock | 7.1 / 6.3 in/min |
| Hole Diameter | 1/2" - 1 3/4" |
| Hole Depth | 25" |
| Air Inlet | 3/8" |
| Chuck Size Hex | 7/8" x 3 1/4 in |
CP Rock Drills PDF
