FlexiRoc T40 R

Main application area:  Quarrying ; Civil engineering
Drilling method:  Tophammer

 Click on logo for manufacturers site

FlexiROC T40 R is a flexible and versatile tophammer drill rig with full Radio Remote Control of drilling, tramming and winch functions, developed and designed for high performance in demanding construction applications. It’s also a very efficient alternative for small and medium size quarrying jobs. Even in the worst imaginable terrain conditions, utilization of the rig is high, thanks to the long reach of the boom, the low center of gravity and hydraulic support leg that can be used during tramming. It is equipped with a highly efficient Epiroc rock drill with high output power and productivity.

The FlexiROC T40 R are perfect for places where space is restricted and access is difficult, such as on slopes above road and railway traffic. Where foundations are unstable and slopes are prone to landslides, these radio remote controlled drill rigs can be used for completing the job safely and efficiently.

These rigs are equipped with CAT engines that meet all the new exhaust emission requirements in Tier 4 Final. They deliver the exact power you need in each phase of your operation with considerable reductions in fuel consumption. A powerful generator and heavy-duty batteries secure startup and the extra large fuel tank delivers up to 12 hours of continuous operation.

FleixROC T40 R can be optimized by selecting the right rock drill. COP 1840+ is a perfect all-round rock drill. COP 2540+ is extremely productive in hole range 64–76 mm (89mm soft/medium rock). COP 2560+ is
optimized for hole range 89–127 mm.

Quick facts
Main application areaQuarrying ; Civil engineering
Drilling methodTophammer
Hole diameter3 inch - 4,5 inch
Product familyFlexiROC
CabinNo
Rock drill/DTH hammer sizeCOP 2560+
Rotary headN/A
Maximum hole depth92 ft
Engine558 HP
Air capacity (FAD)316 cfm
Rig Weight31,967 lbs
Hole range (recommended)
ThreadT45, T51
WidthØ 2.5"–5"
Hydraulic rod handling system for max hole length, with 3,6 m (12’) ext. rods92’
Hydraulic Rock drill COP 2560+
Impact power25 kW | 33.5 hp
Hydraulic pressure, max220 bar | 3 190 psi
Impact rate, max44–53 Hz
Torque, max1810 Nm | 1 335 lbf/ft
Weight approx412 lb
Feed
Feed extension55”
Feed rate, max184 ft/min
Feed force, max4 400 lbf
Tractive pull, max4 400 lbf
Total length281”
Travel length167”
Volumes
Hydraulic oil tank65 gal
Hydraulic system, total79 gal
Compressor oil6.3 gal
Diesel engine oil7.4 gal
Diesel engine, cooling water9.2 gal
Diesel engine, fuel tank98 gal
Traction gear0.8 gal
Lubrication tank (ECL)2.6 gal
Dust collector DCT 110
Filter area118 sq.ft
Suction capacity at 500 mm wg1 200 cfm
Suction hose diam5”
Cleaning air pressure, max109 psi
Cleaning air consumption0.06–0.12 cu.ft/pulse
Number of filter elements11 pcs