2.5"x 2.5" 62 1/2D1-23S/G High Pressure

Suction: 2.5"

Discharge: 2.5"

The IPT line of high pressure, engine-driven fire pumps deliver excellent pressure and flow for use in many applications including: fire protection, emergency fire fighting, washdown and AG/sprinkler. These portable units feature metal fuel tanks installed on the engine or frame depending on model*. Pumps are available with Briggs & Stratton Vanguard, Honda or Kohler gasoline or Yanmar diesel engines. Vanguard models feature built-in exhaust prime. The Honda model features
a manual hand prime. These pumps are equipped with Viton® O-rings/gaskets.

Features

• Aluminum construction with replace- able hard coat anodized wear ring

• 2-1/2 ̋ NPT port sizes

• Self-priming to 20 ft. (6,1 m) lift

• Maximum operating pressure to 230 psi (11,4 bar)

* Heavy-duty steel roll cage with battery tray included

* Wheel kit and high pressure hose kit available upon request

* Brass NPT to National Standard Fire Hose thread adapter available upon request

General Information

Do not use in explosive atmosphere or for pumping volatile flammable liquids.

• Built-in discharge check valve
• Discharge pressure gauge included
• Maximum temperature 200 ̊ F (93 ̊ C)

2.5"x 2.5" 62 1/2D1-23S/G Brochure

2.5"x 2.5" 62 1/2D1-23S/G Operators Manual

3x3 13D-GX270 Specs

Suction	2.5"
Discharge	2.5"
Solids Handling	.31"
Casing	Aluminum
Impeller/Rotor	Aluminum
Seal Material	Silicon Carbide
Drive Type	Gasoline Engine
Unit Weight	231 lbs
Maximum Operating Pressure	228 psi
Fuel Tank	10 Gallons
Full Load Operating Time	7
Max Gallons Per Minute	260